12.0 FACTORY PARAMETERS
If after the last Technical Parameter the [Unit] key is pressed then the scale
advances to the Factory Parameter section. This contains critical calibration
reference information and is protected by a Pin Code which can only be
accessed by a qualified technician. To exit the Pin Code entry when the display
shows "Pi", the scale must be switched off.
13.0 REPLACEMENT PARTS AND ACCESSORIES
If you need to order any spare parts and accessories, contact your dealer or
Adam Equipment. A partial list of such items is as follows-
• Power Supply Adapter
• Main Power cord
• Replacement Battery
• Stainless Steel Pan
© Adam Equipment Company 2006
• In use cover
• Hard Carry Case with lock & Strap
• Printer, etc.
22