3.3 REMOTE
CONTROL
The remote control works via infra red and can be used to operate the LHS from long distances.
It operates using 2 x AAA batteries and these can be exchanged by unclipping a cover on the rear
of the remote control unit.
3.5 USER
PARAMETERS
Five USER parameters are on the SHS, to access these power up the scale and whilst the display
is counting down press and then release the [Unit] button. The display will show 00000. Use the
[Hold] and [Unit] buttons to enter the code 11111 and then press [Zero]. bEE 1 will be displayed.
Press the [Hold] button to change the setting and the [Zero] button to move to the next
parameter.
PARAMETER SETTING TABLE
FUNCTION
EE
B
H
OD
S
TB
CH
T
YES
© Adam Equipment Company 2017
UNIT
DESCRIPTION
Sets buzzer
0: Disable 1: Enable
Sets the Hold function
0: Peak 1: Standard
Sets the Stable function
0: Disable 1: Enable
Sets weighing unit on power up
0: kg 1: Lb's
2: Newtons(Newtons not available for "a"
models)
Sets save:
0: Not saved 1: Save new settings
DEFAULT
1
1
1
0
0
8