Device Setting - ADF Web HD67038-2-A1 User Manual

Industrial Electronic Devices
DEVICES SETTING:
By Pressing the "Devices Setting" button from the main window for SW67038 (Fig. 2), the window "Devices Setting" appears (Fig. 3 or 4 or
5 or 6).
In the section "Select Modality" field it is possible to select the function mode of the Converter from these options:
Remote COM Port;
Tunnel Point to Point;
Tunnel Point to MultiPoint.
These operating modalities are described in the following pages.
In the section "Select Device" field it is possible to select the device used for the project. These devices are available:
HD67038-2-A1 (/B2)
HD67038-5-A1 (/B2)
HD67038-4-A1
HD67038-25-A1 (/B2)
HD67038-24-A1
HD67038-2
HD67038-25
HD67038M-2
HD67038M-25
ADFweb.com S.r.l.
New hardware version
New hardware version
New hardware version
New hardware version
New hardware version
Old hardware version
Old hardware version
Old hardware version
Old hardware version
User Manual RS485 / RS232 / Ethernet
Document code: MN67038_ENG Revision 2.003 Page 24 of 42