Leds - ADF Web HD67038-2-A1 User Manual

Industrial Electronic Devices

LEDS:

The device has got four (five for -B2 series) LEDs that are used to give information of the functioning status.
The various meanings of the LEDs are described in the table below.
LED
1: Device state
2: Ethernet link
3: Ethernet comm.
4: Serial comm.
5: Not used (present only
on -B2 series)
ADFweb.com S.r.l.
Normal Mode
Blinks slowly (~1Hz)
ON: Ethernet cable connected
OFF: Ethernet cable disconnected
Blinks when are received Ethernet
data
Blinks when receive a Serial data
OFF
User Manual RS485 / RS232 / Ethernet
Document code: MN67038_ENG
Boot Mode
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
ON: Ethernet cable connected
OFF: Ethernet cable disconnected
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Revision 2.003 Page 18 of 42