Leds - ADF Web HD67669-A1 User Manual

Industrial Electronic Devices

LEDS:

The device has got seven LEDs that are used to give information about the functioning status.
The various meanings of the LEDs are described in the table below.
LED
1: ON (green)
2: Serial (green)
3: Device State (green)
4: Ethernet (green)
5: Ethernet1 Tx (green)
6: Ethernet2 Tx (green)
ADFweb.com S.r.l.
Normal Mode
ON: Device powered
OFF: Device not powered
It blinks when a Modbus request is received
Blinks slowly (~1Hz)
It blinks when EtherNet/IP comm. Is running
It blinks when Ethernet or EtherNet/IP communication
is running
It blinks when Ethernet or EtherNet/IP communication
is running
User Manual EtherNet/IP Master/ Modbus slave
Document code: MN67669_ENG
Boot Mode
ON: Device powered
OFF: Device not powered
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
Revision 1.000 Page 11 of 27