System - Eneo MCB-72M2712M0A User Manual

A. SYSTEM
Sets the system related functions.
OUTPUT
SDI OUTPUT
ANALOG OUT0
RETURN
A-1. OUTPUT : Selects the main video output.
A-1-1. SDI OUTPUT : Selects the SDI output HD-SDI, EX-SDI 1.0, EX-SDI 2.0, OFF
A-1-2. ANALOG OUT0 :
Selects HD-ANALOG modes TVI MODE, AHD MODE, CVI MODE or CVBS. It can be
controlled Y-Gain, CB/CR-Gain, Position, Burst and etc.
Please set ANALOG OUT0 to TVI MODE, AHD MODE or CVI MODE if CVBS video is
necessary through sub-out port. If ANALOG OUT0 is set to CVBS, there is no CVBS
video through sub-out port and sub-out port outputs CVBS video only.
i
If CVBS video is enabled through ANALOG OUT0 or Sub-out port, WDR and
3D-NR functions are disabled in all video outputs. It should be considered when
installer adjusts the video with installation monitor via CVBS video signal.
A-2. RESOLUTION
Select the video resolutions, 1080P/720P are available. 1080P outputs 1920x1080
video at the frame rate of 30P/25P. 720P outputs 1280x720 video at the frame rate
of 60P/50P.
24
A. SYSTEM
OUTPUT
RESOLUTION
TV SYSTEM
COMM.
LANGUAGE
CAM TITLE
RESET
RETURN
HD-SDI
TVI MODE
1080 25P
EU(PAL)
ENG
OFF
ON
HD-ANALOG
ANALOG OUT0
MAIN OUTPUT
ANALOG OUT0 TVI MODE
Y GAIN 16
CB GAIN 65
CR GAIN
68
POSITION
128
BURST FREQ 128
BURST GAIN 108
B&W
BURST ON
UTC TYPE
Pelco-C
720 EX
OFF
RETURN
llllllllllllllllllllll
llllllllllllllllllllll
llllllllllllllllllllll
llllllllllllllllllllll
llllllllllllllllllllll
llllllllllllllllllllll