Table of Contents
Advertisement
2. ZOOM/FOCUS
AF MODE
MODE CHANGE
SCANNING
ONEPUSHAF
SYNC TDN
INITIAL
RETURN
AF MODE Changes to MANUAL automatically
after 3 hrs when MODE CHANGE is ENABLED.
2-3. SCANNING
Lens scanning can be set to performs HALF or FULL on the screen.
Scanning checks the positions for zoom/focus at both of the end positions and
saves them for the references.
2-4. ONEPUSHAF
Focusing is activated only when zoom in/out is working.
2-5. SYNC TDN
Compensates for IR correction when the camera switches to DAY or NIGHT.
It is recommended to set OFF except speci c conditions.
2-6. INITIAL
Lens initialization is necessary during the installation or the regular operation to
align the position data with the mechanical positions whose lens elements may
move and deviate from its calibrated position by the shock or vibration, for
example, during the transportation. Lens initialization is automatically
executed at power up.
INITIAL starts the lens initialization when pressing the joystick straight down for
about 2 sec. It is strongly necessary to execute LENS INIT in cases below;
- At the nal step for the installation.
- When focus becomes out of control by the shock or vibration.
3. EXPOSURE
ZOOMPUSH
ENABLED
HALF
ON
OFF
ON
3. EXPOSURE
BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN
2. ZOOM/FOCUS
AF MODE
MODE CHANGE
SCANNING
ONEPUSHAF
SYNC TDN
INITIAL
RETURN
9
llllllllllllllllllllll
AUTO
X2
7
llllllllllllllllllllll
MANUAL
NOT USED
EN
HALF
ON
OFF
ON
15
Advertisement
Table of Contents
