Image - Eneo MCB-72M2712M0A User Manual

8. IMAGE

8. IMAGE
SHARPNESS
GAMMA
MIRROR
FLIP
D-WDR
DEFOG
PRIVACY
RETURN
8-1. SHARPNESS
Sets the Sharpness level 0~10. Increases or decreases the sharpness of the picture.
Too much sharpness can make image harsh and show more noise as well as line
icker at the edge of object in the picture.
8-2. GAMMA
Adjust gamma level of video.
8-3. MIRROR
The Video is reversed left and right if it turns ON.
8-4. FLIP
The Video is reversed upside down if it turns ON. When the video is iped by
Vertical, then the joystick directions are reversed accordingly. It is very useful
when a camera in installed in upside
8-5. D-WDR
Improves the visibility for the high bright area and the dark area by compensating
the video gain. Care should be taken to select low, middle or high level, because
video may lose its quality in some environments by the over compensation. Video
noise can be increased in the dark area accordingly.
8-6. DEFOG
Enhance the foggy video according to status of scene. Video quality can be less in
normal environments. Sets AUTO or MANUAL mode.
8-6-1. MODE :
• AUTO : Enhance the foggy video automatically according to status of scene.
• MANUAL : Sets to enhance the foggy video manually regardless of status of scene.
8-6-2. LEVEL : Sets Low, Mid or High.
Video quality can be less in normal environments.
0.55
OFF
OFF
OFF
OFF
OFF
SHARPNESS
ANALOG OUT0
MAIN OUTPUT
TVI MODE
ANALOG OUT0
SDI&CVBS 5
llllllllllllllllllllll
5
CVI MODE
llllllllllllllllllllll
TVI MODE 6
llllllllllllllllllllll
AHD MODE 7
llllllllllllllllllllll
RETURN
EN
21