Table of Contents
Advertisement
Hex wrench
Operating instructions
Using OSD controller
Setup menu can be accessed and controlled by OSD control joy stick on the side of
camera unit. Five commands are available with the joy stick.
SUB-OUT
Video Sub-out
Connector
Description of the OSD control operation
1. SET (
) : Access to the menu or enter the setting. To enter the main menu,
●
press the Set Key down.
2. UP/DOWN (▲/▼) : Choose the desired sub-menu and to move the cursor up
or down.
3. LEFT/RIGHT (◄/►) : Set up the value of the selected menu. Used to adjust the
desired menu selection and to move the cursor left or right.
4. '
' denotes the long press down straightly for about 2 seconds
Description of the Motorized ZOOM&FOCUS adjustment
i
Works only when OSD Menu is inactive.
1. ▲ : Zoom In
2. ▼ : Zoom Out
Adjustment of viewing angle with a bracket
OSD Control Joy Stick
ZOOM
3. ◄ : Focus Near
4. ► : Focus Far
EN
11
Advertisement
Table of Contents
