Table of Contents
Advertisement
2.3
Driver Installation
2.3.1
Chipset, Graphics, ME, and LAN Driver Installation
Relevant drivers must be installed for full functionality. Install the chipset, graphics,
ME, and LAN drivers individually. The drivers can be downloaded from the TPC-5000
product page of the Advantech website.
(Windows 7, Windows 8, and Windows 10 have built-in multi-touch driver support.)
2.3.2
Watchdog Driver Installation
If the Advantech watchdog driver is not pre-installed on the TPC system, users will
need to install the driver.
Follow the steps outlined below to install the Advantech watchdog driver.
1.
Verify that the computer meets the hardware and software requirements to run
the Advantech watchdog driver.
2.
If you do not already have the installer for the Advantech watchdog driver,
download it from the Advantech website.
3.
From the Control Panel, remove any existing installation of the Advantech
watchdog driver from the computer.
4.
With administrator-level privileges, run the installer for the Advantech watchdog
driver.
Below is an example of the Advantech watchdog driver setup. To stop the setup pro-
cess at any time, click the "Cancel" button on the pop-up screen. The setup program
will stop the procedure automatically.
1.
Open the setup program.When the setup program is running, click the "Next"
button on the Advantech Watchdog Driver Setup Wizard pop-up screen.
2.
Wait until the Advantech Watchdog Driver Setup Wizard has completed the
installation.
11
TPC-5000 Series User Manual
Advertisement
Table of Contents
