Table of Contents
Advertisement
2.7.6
NFC/RFID and Wi-Fi Module Installation
NFC/RFID and Wi-Fi modules should be installed on the front panel.
1.
Open the bracket at the back of the front panel.
2.
Insert the Wi-Fi module into the mPCIe slot, connect the antenna, and tighten
the affixing screws.
3.
Plug the USB cable into the NFC/RFID module and affix it in place using an
adhesive.
TPC-5000 Series User Manual
Figure 2.12 Wi-Fi module installation
Figure 2.13 NFC/RFID module installation
20
Advertisement
Table of Contents
