Huawei UPS2000-G-2KRTL User Manual page 40

UPS2000-G-(1 kVA-3 kVA)
User Manual

Display

Display
The DHCP function setting, IP address display, subnet mask display, and gateway display are
available only when an SNMP card is configured. If no SNMP card is connected, default
values are displayed for the IP address, subnet mask, and gateway. If an SNMP card is
connected, the IP address, subnet mask, and gateway need to be set on the WebUI of the
SNMP card. For details, see RMS-SNMP01B SNMP Card User Manual.

Display
Issue 08 (2017-08-04)
Set the buzzer off function.
Set the automatic startup function.
DHCP function setting
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Setting Control Panel
Setting
Enable or disable the buzzer off function.
ENA: used to enable the buzzer off
function.
DIS: used to disable the buzzer off function.
By default, the buzzer off function is
disabled.
Setting
Enable or disable the automatic startup
function.
ENA: Enables the automatic startup
function.
DIS: Disables the automatic startup function
(default value).
Remarks
Address allocation mode setting:
ENA: enabled
DIS: disabled (default value)
33