Canon HJ40x10B Operation Manual page 52

30
16 IS Power Off Switch
Use this switch to turn off the power supply to
the image stabilizer.
17 F.B. Adjusting Lock Screw
Turn this screw to tighten or loosen the F.B.
adjusting ring.
18 Locating Pin
Determines the mounting position of the lens.
19 Macro Button
Use this button to shoot an object which is closer
than the M.O.D.
20 Extender Lever
The built-in 2x extender can be moved in and out
by turning this lever.
21 Focus Ring
Turn this ring to focus on the object manually.
22 Zoom Ring
Use the zoom ring to operate the zoom manually.
23 Iris Ring
Turn this ring to operate the iris manually.
24 IS Power On Lever
Use this lever to release the mechanical lock on
the image stabilizer.
21
29
28
27
26
22
25
25 Lens Cable
Power and signals are sent to the lens from the
camera head through this cable.
26 Connector for Remote Zoom Control (8pin)
Plug in the 8 pin connector from the remote servo
zoom accessories.
27 Remote Zoom & Remote Focus Control
Connectors (20pin)
Plug in the 20 pin connector from the zoom or
the focus control accessories.
28 IS Remote Connector
This connects the Image Stabilizer (IS) controller.
29 Zoom Operation Change-over Knob
Use this knob to change from manual to servo
zoom operation or vice versa.
30 Focus Operation Change-over Knob
Use this knob to change from manual to servo
focus operation or vice versa.
E6
23
24