Canon HJ40x10B Operation Manual page 64

Function 2. Framing Preset Operation Diagrams
Basic Movement of the Framing Preset Operation
●
When the frame button is pressed, the zoom moves toward the framing memory position (preset zoom
●
position) and stops at the framing memory position.
The zoom moves at the maximum speed when the speed mode selector is set to Fast position, or at
the preset speed when it is set to Pre position.
Framing memory position
Other
●
Any of the following zoom operations can be used to cancel the framing preset operation and/or change
to other zoom operation.
Before the zoom reaches to the framing memory position, by pressing the frame button again, the zoom
●
stops instantly at that position.
Framing memory position
②
The frame button is pressed again
Zoom operation with the zoom seesaw switch can immediately take over.
●
Framing memory position
②
Zoom operation with the zoom rocker seesaw
When the zoom rocker seesaw is released at this point,
④
the zoom stops instantiy.
Zoom operation with the Shtl button will immediately take over.
●
(Note: The frame memory position and the shuttle memory position are independently stored.)
Framing memory position
③
The Shtl button is released
Zoom operation with the switch (either VTR or RET switch can be set for the speed preset function)
●
can immediately take over.
Once the speed preset button is pressed, the zoom moves at the preset speed and direction until it
reaches its end.
Framing
memory position
Zoom end
Note ： The zoom moves at the preset speed and direction until it reaches its end, once the speed preset
button is pressed.
(At the maximum speed)
The frame button is pressed
(At the preset speed)
The frame button is pressed
③ Zoom operation with the zoom rocker seesaw
Stop
Shuttle memory position
②
The speed preset button
is pressed
Any zoom position
Stop
①
The frame button is pressed
①
The frame button is pressed
①
The frame button is pressed
②
The Shtl button is held pressed
(Original position)
①
The frame button is pressed
E18
(Example)
Zoom Position
Operation
Speed mode selector
selected position
Fast
Pre
Any zoom position
Any zoom position
Any zoom position
Any zoom position