Table of Contents
Advertisement
DISPLAY switch
Turns display on/off.
Display
Display turns off after 2 min.
without any operations.
<Top>
Status
Setting
Support
DISPLAY
Cursor button
Press the cursor button up/down/left/right
(
) to move the cursor. Press the
center ( ) to confirm.
BT1-D005-A-ENG
Basic operation
1
Turn on the lens.
2
<Top>
Status
Setting
Support
DISPLAY
The display turns on.
3
<Top>
Status
Setting
Support
DISPLAY
4
DISPLAY
The display turns off, and
changes to the settings
are saved.
©2022.04 CANON INC.
Resetting
1
Press the Display
switch.
DISPLAY
2
Use the cursor button
to select and set
DISPLAY
functions.
The following settings are reset to restore default values.
Indicator on/off setting
Tally function on/off setting
CAFS on/off setting
Virtual output on/off setting
Tally brightness setting
AF frame steps setting
Press the Display
AF frame speed setting
switch.
Horizontal AF frame setting
Vertical AF frame setting
Zoom servo start characteristic settings
Zoom servo stop characteristic settings
Zoom mechanism end stop characteristic settings
Zoom start characteristic settings for preset
operations
Zoom stop characteristic settings for preset
operations
Analog demand curve characteristic settings
Servo mode setting from zoom demand
Cam mode setting
Focus demand curve characteristics
Iris compensation on/off setting
Iris closure detection on/off setting
Press and hold
the Display switch
and cursor button
All Data
together for 2 sec.
or more.
Reset Now.
All Data
Reset Now.
Setting item
Default value
ON
ON
ON
ON
Factory-set value
3
5
000
000
50
50
99
99
91
5
Sped
0
STD
ON
Factory-set value
1/20
Advertisement
Table of Contents
