Mounting And Connections; Mounting The Supporter, Lens, And Tripod - Canon HJ40x10B Operation Manual

3. MOUNTING AND CONNECTIONS

3-1. MOUNTING THE SUPPORTER, LENS, AND TRIPOD

This lens is provided with the dedicated supporter SUP-300. To protect the lens and camera, the dedicated
supporter should always be used. The lens, camera, supporter, and tripod are mounted in the order shown
below.
Mount the supporter on the tripod. Section (A)
①
Mount the camera on the supporter. Section (B)
②
Mount the lens on the camera. Section (C)
③
Adjust the balance. Section (D)
④
(A) MOUNTING THE SUPPORTER ON THE TRIPOD
1. Mount the tripod's V-wedge board to the bottom
of the supporter. V-wedge board mounting tap have
3/8-UNC and 1/2-UNC mounting screw holes.
(The V-wedge board is not supplied by Canon.)
The V-wedge board mounting tap can be moved
forwards or backwards, and the lock handle for the
system center of balance can be locked or unlocked
by turning in the following directions.
Clockwise direction ........................Lock
Counterclockwise direction ...........Unlock
Be sure to lock the V-wedge board once it is mount-
ed.
▼
▼
▼
V-wedge Board (supplied
by tripod manufacturer)
3/8-UNC
Unlock
Lock Handle for
System Center Gravity
E7
Tripod Adapter (supplied by
Supporter
camera manufacturer)
Mount by Supporter
V-wedge Board
Mounting Tap
1/2-UNC
Lock