1. STANDARD COMPOSITION OF THE LENS
Make sure all of the following items are included in the packing box.
(If you find any item missing, please contact the dealer from whom you purchased this product.)
UNIT
LENS BODY ........................................................................................................................ 1
HOOD CAP ......................................................................................................................... 1
HOOD .................................................................................................................................. 1
LENS CAP ........................................................................................................................... 1
DUST CAP ........................................................................................................................... 1
ZOOM LEVER (mounted on lens body) .............................................................................. 1
SUPPORTER ...................................................................................................................... 1
IS CONTROLLER ................................................................................................................ 1
STICKER ............................................................................................................................. 1
OPERATION MANUAL
( * 1)
Depending on specifications and others, this lens comes without a supporter.
The product configuration and operation method contained in this manual are applicable
when used with a Canon standard supporter.
If using a different supporter, please refer to the operation manual for the supporter you use.
(The above drawing shows the HJ40x10B IASD-V. Shapes of lens may be slightly different depending on
the models and the specifications.)
Accessories other than those mentioned above may be required depending on the specifications of your
unit. For details, contact your dealer or Canon Inc.
*(NOTE):
1) Store the lens at room temperature.
2) Take measures to avoid sudden changes in temperature where the lens is used, which may prevent
operation temporarily if condensation forms in the lens.
3) Do not subject the lens to strong physical shocks or vibration.
Hood Cap
Hood
Lens Cap
Lens Body
Zoom Lever
Supporter
E4
IS Controller
Dust Cap
Operation Manual
Sticker
Q TY
( * 1)