Focus Operation - Canon HJ40x10B Operation Manual

5-2. FOCUS OPERATION

Manual operation with the focus ring of the lens
●
Make sure that the focus operation change-over knob is set
to the MANU. position, before starting manual focus opera-
tion. If it is set to the SERVO position, change it to the MANU.
position.
CAUTION: The zoom mechanism can be damaged if the lens is forced to perform manual zoom
Turn the focus ring clockwise, as viewed from the cam-
era, to focus the lens on a close object.
Turn it counterclockwise, as viewed from the camera, to
focus the lens on an object farther away.
while the lens is set to the SERVO side. Therefore, be sure that the lens is set to the
MANU. side before performing manual zoom.
Focus Operation Change-over Knob
Focus Ring
E22
Near
Far