Table of Contents
Advertisement
Advertisement
Chapters
Table of Contents
Related Manuals for Canon RF-24-105mm-f-4L-IS-USM
Summary of Contents for Canon RF-24-105mm-f-4L-IS-USM
- Page 1 Instructions...
- Page 2 Thank you for purchasing a Canon product. Canon’s RF24-105mm F4 L IS USM is a Camera Firmware standard zoom lens for use with EOS R series cameras. Please use the latest version of firmware with the camera in use. For details on whether the firmware is the latest version or not, and for details on updating “IS”...
-
Page 3: Safety Precautions
Safety Precautions Precautions to ensure that the camera is used Caution Details pertaining to risks that may result in safely. Read these precautions thoroughly. Make damage to property. sure all details are observed in order to prevent Do not leave the product in excessive heat such as risks and injury to the user and other people. - Page 4 General Precautions Handling Precautions If the lens is taken from a cold environment into a warm one, condensation may develop on the lens surface and internal parts. To prevent condensation in this case, first put the lens into an airtight plastic bag before taking it from a cold to warm environment.
- Page 5 This device complies with Part 15 of the FCC Rules. CAN ICES-3 (B) / NMB-3 (B) Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 6 Nomenclature Zoom ring (→ 7) Zoom position index (→ 7) Focus mode switch (→ 7) Hood mount (→ 12) Zoom ring lock lever (→ 8) Rubber ring (→ 6) Filter mounting thread (→ 13) Control ring (→ 9) Focusing ring (→ 7) Contacts (→...
-
Page 7: Rubber Ring
Turn the lens counterclockwise while pressing usage. the camera’s lens release button. Detach the lens once it has stopped turning. Rubber rings can be replaced at Canon Service Center. (chargeable) Please refer to the camera's instructions for details. ENG-6... -
Page 8: Focus Mode Switch
2. Setting the Focus Mode 3. Zooming Focus mode switch To zoom, turn the lens’ zoom ring. Focusing ring Be sure to finish zooming before focusing. To shoot in autofocus (AF) mode, set the focus Zooming after focusing can affect the focus. Blurring may temporarily occur if the zoom ring mode switch to AF. - Page 9 4. Fixing the Zoom Ring The zoom ring can be fixed to keep the lens at the shortest point. This function is convenient for carrying a camera on a strap because it prevents the lens from extending. Turn the zoom ring to Slide the zoom ring lock the widest position (24 lever in the direction...
-
Page 10: Control Ring
There are cases in which the sound of control ring operations may be recorded when shooting movies. The clicking sensation of the control ring can be removed by the Canon Service Center. (chargeable) ENG-9... -
Page 11: Image Stabilizer Switch
6. Image Stabilizer This function provides image stabilization The Image Stabilizer cannot compensate for a appropriate for shooting conditions (such as blurred shot caused by a subject that moved. shooting still subjects and panning shots). The Image Stabilizer may not be fully effective if you shoot from a violently shaking vehicle or other transportation. - Page 12 Image Stabilizer The Image Stabilizer for this lens is suited to hand-held shots in the following conditions. In semi-darkened areas such as indoors or outdoors at night. In locations where a flash cannot be used, such as art museums and theater stages. In situations where your footing is uncertain.
- Page 13 7. Hood The custom lens hood cuts out unwanted light and protects the front of the lens from rain, snow, and dust. Attachment position mark Red dot Button ● Detaching the Hood Red dot Red dot Keep your finger pressed down on the button Stop position mark Attachment position mark located on the side of the hood, and then turn...
-
Page 14: Filter Mounting Thread
Only one filter may be attached. It provides a magnification of 0.05x to 0.39x. If you need a polarizing filter, use the Canon Circular Polarizing Filter PL-C B. Close-up Lens 250D cannot be attached Detach the hood when adjusting the polarizing because there is no size that fits the lens. -
Page 15: Specifications
Add 24.2 mm/0.95 in. when including the lens cap and dust cap. The maximum diameter, length and weight listed are for the lens itself only. All data listed is measured according to Canon standards. Product specifications and appearance are subject to change without notice. - Page 16 CT1-D037-A 0718Ni © CANON INC. 2018...