§2. MOUNTING and CONNECTING
2-1.
For digital "R" type and "R" type lenses only
(A) Lens side preparation
Remove the zoom lever.
(NOTE) :
(B) Mount the necessary accessories
1. To mount the clamper
Loosen the large and small fastening
knobs of the clamper provided with the
fl exible zoom control unit.
Mount this unit onto panning rod of
the tripod, and tighten both fastening
knobs to secure the clamper.
2. To mount the focus demand
Mate the rose joint of the focus demand
with the rose joint of the clamper.
Then tighten them with the mounting
k n o b o f t h e c l a m p e r b y t u r n i n g
clockwise.
Be sure to keep the zoom lever in a safe place so as not
to lose it.
Mouning Knob
Mouning Knob
Clamper
- 26 -
Clamper
Fastening Knobs
Focus Demand