Chip Card Transactions - Ingenico iWL220 Manual

Chip card transactions

Attention!
When paying with a chip card, make sure to use the chip.
Ingenico iWL220 Payment Terminal
Message on
terminal screen
Welcome
10.00 EUR
Insert the card
Please wait!
Enter PIN
PIN OK
Connection...
Please wait
Waiting for reply...
Please wait
Transaction is
completed
Take the receipt
and press the key
Action
The terminal is in standby mode. Enter the sum of the terminal transaction in cents
(e. g. if the sum of the transaction is 10.00 EUR, enter 1,000)
Press the green key
To correct the sum (one character at a time), press the yellow key
To cancel the transaction, press the red key
Insert the bank card in the chip card reader of the PIN pad connected to the
terminal, or ask the client to insert the card.
Ask the client to enter their bank card's PIN on the PIN pad The green key
the PIN pad must be pressed.
To correct the PIN (one character at a time), press the yellow key
To cancel the transaction, press the red key
If the correct PIN has been entered, the terminal will connect to the bank
The terminal will print out the first receipt
Tear off the receipt and press the green key
To renounce the second receipt, press the red key
Ask the client to remove their bank card from the chip card reader.
after completing the entry.
.
.
, to print out the second receipt.
.
.
.
on
8