Contactless Card Transactions - Ingenico iWL220 Manual

Contactless card transactions

Ingenico iWL220 Payment Terminal
Message on
terminal screen
Welcome
Use the card
Reading the card
Successful
Remove the card
Transaction is
completed
Take the receipt
and press the key
•
In the case the transaction exceeds a certain limit for some bank cards , the terminal may require the
signature of the client, and the merchant must verify the signature on the back side of the card. If the
signature is authentic, press the green key
goods cannot be sold to the client and the transaction must be cancelled by pressing the red key
•
If the sum of the contactless card transaction exceeds the allowed transaction limit, the PIN pad will
prompt the card to be inserted in the card reader and a chip card transaction will be performed (see "Chip
card transactions", page 8).
•
The first copy of the receipt remains with the merchant, the second one is handed to the buyer.
•
Action
The terminal is in standby mode. Enter the sum of the terminal transaction in cents
(e. g. if the sum of the transaction is 10.00 EUR, enter 1,000).
Press the green key
green light will be on PIN pad.
To correct the sum (one character at a time), press the yellow key
To cancel the transaction, press the red key
Ask the client to place the card on the signal receiver of PIN pad until a beeping
sound is heard.
The card has been successfully read if four lights turn on and the device produces a
sound indicating successful reading of the card.
The terminal will connect to the bank.
The terminal will print out the first receipt.
Tear off the receipt and press the green key
To renounce the second receipt, press the red key
after completing the entry. After entering the sum, one
.
, to print out the second receipt.
on the terminal. If the signature is not authentic, the
.
.
.
6