Ingenico iWL220 BT Series Installation Manual

Ingenico iWL220 BT Series Installation Guide
IMPORTANT INFORMATION EMV CHIP CARD PROCESSING
This device has the ability to process EMV chip cards. If you are
set up to accept chip cards, you will notice a few differences.
1. Chip cards must be inserted into the device or pin pad if
attached (swiped transactions are not allowed).
2. The chip card must remain in the device until the transaction
is complete.
3. The transaction may require a customer to enter a PIN
(similar to a debit transaction).
4. Chip card transactions require the credit card to remain in
the the cardholder's possession at all times.
For more information regarding EMV chip card acceptance and
processing, please visit: www.paymentstart.com/secure
INSTALLATION INSTRUCTIONS
Step 1: Open box
Step 2: Follow installation instructions on page 2
Step 3: Begin processing
Look for Ingenico NA online
help videos on YouTube –
DOCUMENT D'EXECUTION
INGENICO_CMJN.ai
INFORMATIONS GENERALES COULEURS UTILISEES APPROBATION
Client: INGENICO
Date : 10 DEC 2013
search for "Out of the box:
C 67/M 54
C 0/M 100
J 47/N 43 J 100/ N0
Utilisation: Impression quadri.
Ne pas utiliser pour application
écran.
iCT200 Series."
CONTACT US:
www.paymentstart.com
for user guides and other DIY tips
1-866-451-4007
Activation & Training
8:30 AM – 9:00 PM ET, M-F
Your
Payment Solutions
Team