Adding A Technology Module To Hardware Configuration (Compact Cpu) - Siemens SIMATIC ST-1500 Function Manual

Using the module
5.1 Using the technology module
5.1.2.2

Adding a technology module to hardware configuration (Compact CPU)

Requirement
The project has been created.
Procedure
To add a Compact CPU to the project tree, follow these steps:
1. Double-click "Add new device".
The "Add new object" dialog opens.
2. Select Controller".
3. Select the Compact CPU:
"SIMATIC S7-1500 > CPU > Compact CPU > Article number"
4. Confirm with "OK".
Result
The new Compact CPU is displayed with the following objects in the project tree. Double-
click to open the required editor.
①
②
See also
Parameter assignment of module (Page 183)
170
Object Description
Device configuration In the Inspector window (per channel):
(Page 172)
•
•
•
•
•
•
•
Online & Diagnostics
•
(Page 183)
•
•
Activation of the counter (Page 180)
Assign signals to inputs and outputs (Page 181)
Setting the reaction to CPU STOP (Page 172)
Enable diagnostic interrupts (Page 174)
Setting the operating mode (Page 174)
Enable hardware interrupts (Page 177)
Setting the module addresses
Hardware diagnostics
Obtain information about the Compact CPU
Run firmware update
Counting, measurement and position detection
Function Manual, 12/2017, A5E32009889-AG