Basics Of Counting (Tm Timer Didq); Overview Of Applications - Siemens SIMATIC ST-1500 Function Manual

The basics of counting, measurement and position detection

2.3 Basics of counting (TM Timer DIDQ)

2.3 Basics of counting (TM Timer DIDQ)
2.3.1

Overview of applications

Introduction
You configure the TM Timer DIDQ and assign its parameters with the configuration software.
The module's functions are controlled and monitored via the user program.
System environment
The respective module can be used in the following system environments:
Applications
Central operation with a
S7-1500 CPU or ET 200SP
CPU
Distributed operation with a
S7-1500 CPU
Distributed operation with a
S7-300/400 CPU
Distributed operation in a
third-party system
Note
A description of the control and feedback interface is available in the device manual for the
TM Timer DIDQ.
76
Components required
S7-1500 Automation
•
System or ET 200SP Dis-
tributed I/O System
TM Timer DIDQ
•
S7-1500 Automation
•
System
ET 200 Distributed I/O
•
System
TM Timer DIDQ
•
S7-300/400 automation
•
system
ET 200 distributed I/O
•
system
TM Timer DIDQ
•
Third-party automation
•
system
ET 200 distributed I/O
•
system
TM Timer DIDQ
•
Configuration software
STEP 7 (TIA Portal) and
STEP 7:
Device configuration and
parameter setting with hard-
ware configuration
Third-party configuration
software:
Device configuration and
parameter settings with GSD
file
Counting, measurement and position detection
Function Manual, 12/2017, A5E32009889-AG
In the user program
Direct access to feedback
interface of the technology
module in the I/O data