Unit Reset; Ikvm Reset; Factory Default; Ipmi Configuration - Interactive Intelligence Interaction Edge Installation And Configuration Manual

Interaction Edge IPMI reference
Select Firmware to Upload box
Browse button
Upload Firmware button
Cancel button

Unit Reset

This tab displays the Unit Reset page, which enables you to restart the IPMI device.
This page contains the Reset button, which enables you to restart the IPMI device. It will then attempt to
reconnect your web browser to the IPMI.

IKVM Reset

This tab displays the IKVM Reset page, which enables you to restart the Integrated Keyboard Video Mouse
(IKVM) feature.
This page contains the Reset button, which enables you to restart the IKVM feature and the any associated
virtual media connection that you have configured.

Factory Default

This tab displays the Factory Default page, which enables you to set the IPMI configuration back to the
settings that were present when you received your Interaction Edge appliance.
This page contains the Restore button, which enables you to load the IPMI configuration that was present
when you received your Interaction Edge appliance.

IPMI Configuration

This tab displays the IPMI Configuration page, which enables you to save the current configuration of the
IPMI device to a file on your personal computer or network, or load a previous-saved IPMI configuration from
a file.
This page contains the following controls:
Save button
Reload IPMI Configuration box
Browse button
This control enables you to specify the drive, path, and
filename of the firmware revision that you want to apply
to the IPMI device.
This control enables you to use a window to navigate
through the file system and locate the firmware revision
file that you want to apply to the IPMI device.
This control enables you to start the updating process
for the IPMI device firmware after you have specified
the firmware revision file in the Select Firmware to
Upload box.
This control enables you to abandon the firmware
update process.
Item
Note:
When you cancel a firmware update, the IPMI
device must restart itself. It will then attempt
to reconnect your web browser to the IPMI.
Description
This control enables you to save the current IPMI
configuration to a file. A window is displayed that
enables you to select the recipient location and
filename.
This control enables you to specify the location where a
previously-saved configuration file exists.
This control enables you to display a window through
51