Interactive Intelligence Interaction Edge Installation And Configuration Manual page 41

Interaction Edge LCD panel
6. When you are finished editing the value of this field, move the cursor to the beginning or end of the value.
The navigational icons change to display a check mark and an X.
7. To save your changes, press the LCD panel button that corresponds to the check mark icon (button #2).
To discard your changes, press the LCD panel button that corresponds to the X icon (button #3).
The screen returns to the Machine Name menu item with the right, left, up, and down navigational icons.
8. Press the LCD panel button that corresponds to the down arrow navigation icon (button #4) until the
Apply menu item is displayed.
9. Press the LCD panel button that corresponds to the check mark navigation icon.
The changes that you made are applied to Interaction Edge.
Important!
When you are editing a value in a field, Interaction Edge restricts the values to ones that are valid for
the field. You may need to first edit adjacent values to ensure that you can change the initial value as
necessary. IP addresses and host names must always be valid, which can restrict moving the cursor
into an empty space as it would invalidate the address or name.
41