Date And Time; Mouse Mode; Network - Interactive Intelligence Interaction Edge Installation And Configuration Manual

Interaction Edge IPMI reference

Date and Time

Select this tab to display the Date & Time page, which enables you to configure various chronological
settings.
This page contains the following controls:
Time Zone list box
NTP Enable options
Primary NTP Server box
Secondary NTP Server box
Date list boxes
Time boxes
Daylight Saving Time check box
Refresh button
Save button

Mouse Mode

Select this tab to display the Mouse Mode Setting page, which enables you to configure the mouse for the
Interaction Edge operating system.
Important!
The mouse mode should always be set to Set Mode to Absolute.

Network

Select this tab to display the Network Settings page. This configuration is only for the IPMI network port.
It does not affect the configuration of the Interaction Edge network interface cards (NICs).
This page contains the following controls:
Item
MAC Address box
Item
This control contains the Media Access Control (MAC)
address of the network interface card (NIC) of the IPMI.
Description
This control enables you to select the time zone in
which this Interaction Edge appliance is located. This
setting does not affect any time zone configuration
that you set through the Interaction Edge web
interface.
This set of controls enables you to set whether the
IPMI synchronizes the date and time through the
Network Time Protocol (NTP). This protocol uses a
separate server with which the time is synchronized.
This control enables you to enter the IP address of an
NTP server with which the time for IPMI is
synchronized.
This control enables you to enter the IP address of a
fallback NTP server should the primary NTP server be
unreachable.
These controls enable you to set the current month,
day, and year for the IPMI.
These controls enable you to set the current hours,
minutes, and seconds for the IPMI.
This control enables you to specify if IPMI will
automatically adjust the time according to Daylight
Saving Time.
This control refreshes the data displayed on this page.
This control saves any changes that you have made
on this page.
Description
45