Maintenance; Firmware Update - Interactive Intelligence Interaction Edge Installation And Configuration Manual

50
Reset Server option
Power Off Server –
Immediate option
Power Off Server – Orderly
Shutdown option
Power On Server option
Power Cycle Server option
Perform Action button

Maintenance

This area enables you to do maintenance tasks on the IPMI. It contains the following tabs:


Firmware Update


Unit Reset

IKVM Reset

Factory Default

IPMI Configuration
Firmware Update
This tab displays the Firmware Update page, which enables you to place the IPMI in a state that allows you
to apply a new revision of firmware for the IPMI device.
This page contains the Enter Update Mode button, which enables you to place the IPMI device in a state in
which the firmware for the device can be updated.
This page contains the following controls:
This control enables you to restart the server as though
you selected the Restart feature from the operating
system. This is considered a "warm boot" or "soft
restart".
This control enables you to shut down the Interaction
Edge appliance as though you removed all power from
the system.
This control enables you to shut down the Interaction
Edge appliance as though you selected the Shutdown
feature through the operating system.
This control enables you to start the Interaction Edge
appliance after a shutdown.
This control enables you to have the Interaction Edge
appliance shut itself down as though you selected the
Shutdown feature from the operating system. It is then
immediately restarted. This is a considered a "cold boot"
or a "hard restart".
This control enables you to issue the selected power
command to the Interaction Edge appliance.
Item
Important!
Interactive Intelligence does not recommend
using this option on a functioning Interaction
Edge appliance as it could cause problems with
the operating system, different aspects of the
Interaction Edge appliance, or the Interaction
Gateway software. You should use this option
only if the Interaction Edge appliance is in an
unresponsive state.
Description
Interaction Edge IPMI reference