Sensor Readings; Event Log; Configuration - Interactive Intelligence Interaction Edge Installation And Configuration Manual

44

Sensor Readings

Select this tab to display the current state of the hardware in the Interaction Edge appliance.
This page contains the following controls:
Select a sensor type category list box
Table
Refresh button
Show Thresholds button

Event Log

Select this tab to display the events that have occurred regarding the IPMI or Interaction Edge hardware
components.
This page contains the following controls:
Select an event log category list box
Table
Clear Event Log button

Configuration

This area enables you to change settings for the IPMI and for the Interaction Edge appliance. It contains the
following tabs:

Date and Time

Mouse Mode

Network

SSL Certification

Port

IP Access Control
Item
Item
Description
This control enables you to select which sensors
are displayed in the table.
This control displays the current observed state
from the sensor, the name of the sensor, the
status of the observed component, and the
current reading for the component.
This control refreshes the sensor data that is
displayed in the table. The data is not
automatically refreshed.
This control displays the minimum and
maximum states that a sensor observed for the
associated component in the table on this page.
Description
This control enables you to select which events
are displayed in the table.
This control displays the event items for the
currently selected category.
This control removes all events from the log.
Caution!
This action cannot be undone.
Interaction Edge IPMI reference