Zte ZXMSG 5200 Technical Manual page 61

)
2. Modify direction: MGC
The Modify command serves to modify priority, event or signal for a
termination. Command format:
TerminationID
[,MediaDescriptor]
[,ModemDescriptor]
[,MuxDescriptor]
[,EventsDescriptor]
[,SignalsDescriptor]
[,DigitMapDescriptor]
[,ObservedEventsDescriptor]
[,EventBufferDescriptor]
[,StatisticsDescriptor]
[,PackagesDescriptor]
Modify ( TerminationID
[, MediaDescriptor]
[, ModemDescriptor]
[, MuxDescriptor]
[, EventsDescriptor]
[, SignalsDescriptor]
[, DigitMapDescriptor]
[, AuditDescriptor]
)
3. Subtract direction: MGC
The Subtract command serves to quit a termination from an affiliated
context, and report termination statistics to MGC. The context will be
detected if the last termination is quit. Command format:
TerminationID
[,MediaDescriptor]
[,ModemDescriptor]
[,MuxDescriptor]
[,EventsDescriptor]
[,SignalsDescriptor]
[,DigitMapDescriptor]
[,ObservedEventsDescriptor]
[,EventBufferDescriptor]
[,StatisticsDescriptor]
MG
MG
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 6 - Interface and Communication
61