Zte ZXMSG 5200 Technical Manual page 63

[,ObservedEventsDescriptor]
[,EventBufferDescriptor]
[,StatisticsDescriptor]
[,PackagesDescriptor]
AuditValue (TerminationID,
AuditDescriptor
)
6. AuditCapabilities direction: MGC
The AuditCapabilities command serves to request MG to return all
possibilities of the priority, event and signal of the terminations that
are allowed by MG. Command format:
TerminationID
[,MediaDescriptor]
[,ModemDescriptor]
[,MuxDescriptor]
[,EventsDescriptor]
[,SignalsDescriptor]
[,ObservedEventsDescriptor]
[,EventBufferDescriptor]
[,StatisticsDescriptor]
AuditCapabilities (TerminationID,
AuditDescriptor
)
7. Notify direction: MG
The Notify command allows MG to notify MGC what events happen in
MG. Command format:
Notify (TerminationID,
ObservedEventsDescriptor,
[ErrorDescriptor]
)
8. ServiceChange direction: MG
The ServiceChange command allows MG to notify MGC that a
termination or a group of terminations will quit service or reenter
service. The command also is used for MG to notify MGC that it can be
used (registered), or notify MGC that MG restarts completely. MGC also
can use the ServiceChange command to notify MG that MGC has a
changeover, or request MG to have one or a group of termination(s)
quit/enter service. Command format:
TerminationID,
[ServiceChangeDescriptor]
MG
MGC
MGC
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 6 - Interface and Communication
63