AXIOMTEK AX12270 User Manual page 53

Suspend Mode
After the selected period of system inactivity (1 minute to 1 hour),
all devices except the CPU shut off. The default value is "Disabled".
System will never enter SUSPEND mode
Disabled
Defines the continuous idle time before the system
entering SUSPEND mode.
1/2/4/6/8/10/2
If any item defined in (J) is enabled & active,
0/30/40
SUSPEND timer will be reloaded
Min/1 Hr
Video Off Option
This setting is used to control the mode in which the monitor will
shut down. Setting options are:
Monitor remains on during power-saving modes.
Always On
Suspend
Monitor blanked when system enters Suspend mode.
Off
Monitor blanked when system enters either Suspend
Susp, Stby
or Standby mode.
Off
All Modes
Monitor blanked when system enters any power saving.
Off
Video Off Method
This setting determines the manner in which the monitor is blanked.
Modem Use IRQ
3, 4, 5, 7, 9, For external modem, 3 or 4 will be used for card type
modem. It is up to card definition. Default is 3.
10, 11, NA
Award BIOS Utility
AX12270 PC/104 Module Series User's Manual
47