AXIOMTEK AX12270 User Manual page 42

AX12270 PC/104 Module Series User's Manual
First/Second/Third Boot Device
These items allow the selection of the 1
the system will search for during its boot-up sequence. The wide
range of selection includes Floppy, LS120, ZIP100, HDD0~3, SCSI,
and CDROM.
Boot Other Device
This item allows the user to enable/disable the boot device not
listed on the First/Second/Third boot devices option above. The
default setting is Enabled.
Boot Up NumLock Status
Selects power on state for NumLock. The default value is "On".
Typematic Rate Setting
This determines the typematic rate of the keyboard. The default
value is "Disabled".
Enabled Enable typematic rate and typematic delay
programming
Disable typematic rate and typematic delay
Disabled
programming. The system BIOS will use default value
of these 2 items and the default is controlled by
keyboard.
Typematic Rate (Chars/Sec)
This option refers to the number of characters the keyboard can
type per second. The default value is "6".
6
8
10
12
15
20
24
30
36
st nd
, 2 , and 3
6 characters per second
8 characters per second
10 characters per second
12 characters per second
15 characters per second
20 characters per second
24 characters per second
30 characters per second
rd
devices that
Award BIOS Utility