Download  Print this page

Advertisement

Hood sensor

The hood sensor is located near the front of the computer.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Lift the rubber cover from the hood sensor (1).
4.
Disconnect the cable from the system board, and then lift the hood sensor out of the computer (2).
To install the hood sensor, reverse the removal procedure.
18
Chapter 4 Removal and replacement procedures
(Preparation for disassembly on page
(Access panel on page
16).
15).

Advertisement

Table of Contents

This manual is also suitable for:

Prodesk 600 g4Elitedesk 705 g4

Comments to this Manuals

Symbols: 0
Latest comments: