Download Print this page
HP ProDesk 400 G7 Disassembly Instructions Manual

HP ProDesk 400 G7 Disassembly Instructions Manual

Microtower pc product end-of-life disassembly

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP ProDesk 400 G7 Microtower PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU
directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking
code on the plastic part. For any questions on plastic marking, please contact
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries, excluding Li-Ion batteries.
Li-Ion batteries. Include all Li-Ion batteries if more
than one is provided with the product (such as a
detachable notebook keyboard battery, RTC coin
cell, etc.)
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
EL-MF877-00
Template Revision C
Last revalidation date 09-May-2018
Notes
With a surface greater than 10 sq cm
All types including standard alkaline, coin or button
style batteries
Battery(ies) are attached to the product by (check all
that apply with an "x" inside the "[ ]"):
[
[X] snaps
[
[
NOTE: Add detailed removal procedures including
required tools in the sections 3.1 and 3.2.
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Delta 350W EPA92 PSU
HPI instructions for this template are available at
HP's Sustainability
] screws
] adhesive
] other. Explain
Power Cord
EL-MF877-01
Contact.
Quantity
of items
included
in product
2
1
1
1
Page 1

Advertisement

loading

Summary of Contents for HP ProDesk 400 G7

  • Page 1 Marketing Name / Model [List multiple models if applicable.] HP ProDesk 400 G7 Microtower PC Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Quantity of items Item Description Notes included in product already listed as a separate item above) Components and parts containing toner and ink, Include the cartridges, print heads, tubes, vent including liquids, semi-liquids (gel/paste) and toner chambers, and service stations. Components and waste containing asbestos Components, parts and materials containing refractory ceramic fibers...
  • Page 3 25. Use PH1 screwdriver to loose the screws and remove the SSD from the board. 26. Use T-15 screwdriver to loose the screws of MB from board. 27. Remove speaker from Chassis. 28. Remove MB from chassis. 29. Use T-15 screwdriver remove the screws on the PSU chassis. 30.
  • Page 4 Step5 Remove front bezel from chassis Step6 Remove the ODD cage Step7 Disconnect HDD power cable and HDD SATA Step8 Use T-15 screwdriver to loose the screws of HDD and cable from HDD remove HDD from HDD cage Step9 Remove HDD cage from Chassis Step10 Remove HDD from HDD cage EL-MF877-00 Page 4...
  • Page 5 Step11 Disconnect all SATA data cables from MB Step12 Disconnect P1 Power cable from MB Step13 Disconnect system fan cable from MB Step14 Disconnect Speaker and P2 cable from MB EL-MF877-00 Page 5 Template Revision C Last revalidation date 09-May-2018 HPI instructions for this template are available at EL-MF877-01...
  • Page 6 Step15 Use PH1 screwdriver to remove system fan from Step16 Disconnect cooler fan cable from MB chassis Step17 Use T-15 screwdriver to loose the screws and Step18 Use PH1 screwdriver to loose the screws and remove remove cooler the fan EL-MF877-00 Page 6 Template Revision C...
  • Page 7 Step19 Separate the fan from cooler Step20 Remove memory from MB Step21 Rotate the handle and open it up Step22 Remove the CPU from the board EL-MF877-00 Page 7 Template Revision C Last revalidation date 09-May-2018 HPI instructions for this template are available at EL-MF877-01...
  • Page 8 Step23 Remove the battery from the system board Step 24 Remove Graphic card from MB Step 25 Use PH1 screwdriver to loose the screws and Step 26 Use T-15 screwdriver to loose the screw from MB remove the SSD from the board Step 27 Remove speaker from Chassis Step 28 Remove MB from chassis EL-MF877-00...
  • Page 9 Step 29 Use T-15 screwdriver remove the screws on the Step30 Press the latch on chassis PSU chassis Step31 Remove the PSU from chassis Step32 Use PH1 screwdriver to remove screws from the PSU Step33 Remove PSU cover Step34 Use PH1 screwdriver to remove FG screw EL-MF877-00 Page 9 Template Revision C...
  • Page 10 Step35 Disconnect fan connector and inlet connector Step36 Loose screws and remove PCA from case Step37 Use PH1 screwdriver to remove AC inlet & Fan Step38 Heat the solder of the Electrolytic Capacitors of greater screw than 2.5cm in diameter or height and Remove it EL-MF877-00 Page 10 Template Revision C...