A single speaker is located on the left side of the computer behind the front bezel, inside the chassis. It is
secured by a white peg that you pull out to release.
To remove the speaker:
Prepare the computer for disassembly
Remove the access panel
Disconnect the speaker cable from the system board connector (1).
From the front of the computer, remove the Phillips screw that secures the speaker to the chassis (2).
Remove the insulator and tape from the top and inside of the speaker (3).
Lift the speaker straight up and out of the bracket on the inside of the chassis (4).
To install the speaker, reverse the removal procedures.
(Preparation for disassembly on page
(Access panel on page