Download  Print this page

Computer Setup-uefi Drivers; Recovering The Configuration Settings - HP ProDesk 400 G4 Maintenance And Service Manual

Desktop mini.
Hide thumbs

Advertisement

Table 5-3
Computer Setup—Advanced (for advanced users) (continued)
Option
Computer Setup—UEFI Drivers
Lets you restart the computer into the 3rd Party Option ROM Management application. You can start this
application directly by pressing

Recovering the Configuration Settings

This method of recovery requires that you first perform the Save to Removable Media command with the
Computer Setup (F10) Utility before Restore is needed. (See
Computer Setup—File table.)
The Save to Removable Media option creates a file named HPSETUP.TXT on an inserted USB flash media
device. This file can be edited to change the settings on Restore. An asterisk (*) marks the selected option for
a setting.
NOTE:
It is recommended that you save any modified computer configuration settings to a USB flash media
device and save the device for possible future use.
To restore the configuration, insert the USB flash media device with the saved configuration and perform the
Restore from Removable Media command with the Computer Setup (F10) Utility. (See
on page 44
in the Computer Setup—File table.)
Heading
S5 (Soft Off) = LED is off.
Power On from Keyboard Ports (enable/disable)
When enabled, this feature allows a key press to power on the system when it is off (S5 state). If using a
USB keyboard, it must be plugged into one of the rear ports labeled with the keyboard icon. Default is
disabled.
F3
during startup.
Computer Setup–Main on page 44
Recovering the Configuration Settings
in the
Computer Setup–Main
53

Advertisement

Table of Contents

This manual is also suitable for:

Prodesk 600 g4Elitedesk 705 g4

Comments to this Manuals

Symbols: 0
Latest comments: