Download  Print this page

Advertisement

Keyboard commands and typing are not recognized by the computer.
Cause
Keyboard connector is not properly connected.
Program in use has stopped responding to commands.
Keyboard needs repairs.
Computer is in Sleep state.
Mouse does not respond to movement or is too slow.
Cause
Mouse connector is not properly plugged into the back of the
computer.
Program in use has stopped responding to commands.
Mouse may need cleaning.
Mouse may need repair.
Computer is in Sleep state.
Mouse will only move vertically, horizontally, or movement is jerky.
Cause
Mouse roller ball or the rotating encoder shafts that make contact
with the ball are dirty.
70
Chapter 6 Troubleshooting without diagnostics
Solution
Shut down the computer, reconnect the keyboard to the back of
the computer, and then restart the computer.
Shut down your computer using the mouse and then restart the
computer.
See the Worldwide Limited Warranty for terms and conditions.
Press the power button to resume from Sleep state.
CAUTION:
When attempting to resume from Sleep date, do not
hold down the power button for more than four seconds.
Otherwise, the computer will shut down and you will lose any
unsaved data.
Solution
Shut down the computer using the keyboard.
Windows 10:
1.
Press the
Ctrl
and
Esc
keys at the same time (or press the
Windows logo
key) to display the Start menu.
2.
Use the
arrow
keys to scroll to and select the power icon at
the top right on the menu, and then press Enter.
3.
Use the
arrow
keys to select Shut Down, and then press
Enter.
4.
After the shutdown is complete, plug the mouse connector
into the back of the computer (or the keyboard) and restart.
Shut down the computer using the keyboard then restart the
computer.
Remove the roller ball cover on the mouse and clean the internal
components.
See the Worldwide Limited Warranty for terms and conditions.
Press the power button to resume from Sleep state.
CAUTION:
When attempting to resume from Sleep state, do not
hold down the power button for more than four seconds.
Otherwise, the computer will shut down and you will lose any
unsaved data.
Solution
Remove roller ball cover from the bottom of the mouse and clean
the internal components with a mouse cleaning kit available from
most computer stores.

Advertisement

Table of Contents

This manual is also suitable for:

Prodesk 600 g4Elitedesk 705 g4

Comments to this Manuals

Symbols: 0
Latest comments: