Download  Print this page

Advertisement

M.2 PCIe solid state drive (SSD)
For a list of available solid-state drives, see
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
In models with a hard drive, remove the hard drive
on page
4.
Locate the M.2 SSD on the system board.
5.
Remove the screw (1) securing the SSD to the system board, and then pull the SSD from the socket on
the system board (2).
To replace the solid-state drive module, reverse the removal procedures.
(Access panel on page
22.
Computer major components on page
(Preparation for disassembly on page
16).
(Hard drive on page
3.
15).
20) and drive cage
Drive cage
M.2 PCIe solid state drive (SSD)
23

Advertisement

Table of Contents

This manual is also suitable for:

Prodesk 600 g4Elitedesk 705 g4

Comments to this Manuals

Symbols: 0
Latest comments: