Download  Print this page


Table 5-2
Computer Setup—Security (continued)
System Management
Restore Security
Settings to Default
Computer Setup—Advanced
Support for specific Computer Setup options may vary depending on the hardware configuration.
Table 5-3
Computer Setup—Advanced (for advanced users)
Display Language
Scheduled Power-On
Boot Options
HP Sure Recover
Recover in the event of corruption - automatically recover with no prompting.
Allows authorized personnel to reset security settings during a service event. Default is enabled.
This action resets security devices, clears BIOS passwords (not including DriveLock), and restores settings
in the Security menu to factory defaults.
Lets you select the language of the menus in F10 Setup and the keyboard layout.
This feature wakes the system up from a powered off state at a specified date and time.
Select the devices that the computer can boot from, as well as other options, including:
Startup Menu Delay(sec). Enabling this feature will add a user-specified delay to the POST process.
One purpose for the delay is to provide additional time to activate hotkeys such as
Startup Menu or
for Computer Setup.
Fast Boot. Default is enabled.
CD-ROM Boot. Default is enabled.
USB Storage Boot. Default is enabled.
Network (PXE) Boot. Default is enabled.
After Power Loss. Default is Power Off.
Power off—causes the computer to remain powered off when power is restored.
Power on—causes the computer to power on automatically as soon as power is restored.
Previous state—causes the computer to power on automatically as soon as power is restored,
if it was on when power was lost.
If the system is configured to 'Power On from Keyboard Ports' (see Power Management
Options), then this setting is forced to 'Power On'.
Audio Alerts During Boot. Default is enabled. When disabled, most audible beeps from errors,
warnings, and password prompts during boot up are suppressed.
Prompt on Memory Size Change. Default is enabled.
Prompt on Fixed Storage Change. Default is disabled.
UEFI Boot Order.
Default is enabled. Specify the order in which UEFI boot sources (such as a internal hard drive, USB
hard drive, USB optical drive, or internal optical drive) are checked for a bootable operating system
UEFI boot sources always have precedence over legacy boot sources.
Provides the ability to automatically recover the operating system from a local recovery partition or from
the network.
for the
Computer Setup (F10) Utilities


Table of Contents

This manual is also suitable for:

Prodesk 600 g4Elitedesk 705 g4

Comments to this Manuals

Symbols: 0
Latest comments: