Hard Drive - HP ProDesk 400 G4 Maintenance And Service Manual

Hard drive

For a list of available hard drives, see
NOTE: Before you remove the old hard drive, be sure to back up the data from the old hard drive so that you
can transfer the data to the new hard drive.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Rotate the hard drive latch up (1) to disengage the hard drive from the cage. Then slide the drive toward
the rear of the chassis until it stops, and then lift the hard drive up and out of the cage (2).
20 Chapter 4 Removal and replacement procedures
Computer major components on page
(Preparation for disassembly on page
(Access panel on page 16).
3.
15).