Configuring Lan; Hostname; Ip Address & Gateway; Connecting To A Network Shared Folder - Keysight Technologies UXA N9040B Getting Started And Troubleshooting Manual

X-series signal analyzer
Hide thumbs Also See for UXA N9040B:
Table of Contents

Advertisement

Instrument Operating System

Configuring LAN

Configuring LAN

Hostname

The Computer Name, or Hostname, is preconfigured from the factory. It must
be a unique name such that it does not conflict with other equipment on your
LAN. The preconfigured Computer Name is A-<model number>-xxxxx, where
xxxxx is the last 5 digits of the instrument's serial number.
IP Address & Gateway
The instrument is preconfigured to obtain an IP Address via DHCP. You can
change the IP Address and Gateway as you desire.
You must be logged in as an "administrator" (default password:"Keysight4u!")
to make changes.

Connecting to a Network Shared Folder

The instrument contains standard Windows networking. The time required to
authenticate is dependent on your LAN infrastructure. You may have improved
performance by mapping a network drive to the shared folder that you need to
access.
To map a network drive, click the Start icon
Select the Computer Tab, and select Map Network Drive from the drop down
menu:
.
X-Series Signal Analyzers Getting Started and Troubleshooting Guide
., System Tools, Computer.
51

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mxa n9020bPxa n9030bExa n9010bCxa n9000b

Table of Contents