Keysight Technologies UXA N9040B Getting Started And Troubleshooting Manual page 33

Front and Rear Panel Features
Rear-Panel Features
Item
# Name
1 EXT REF IN
2 WIDEBAND DIGITAL BUS
3 10 MHz OUT
4 SNS Series Noise Source
5 Noise Source Drive +28 V
(Pulsed)
6 TRIGGER 1 IN
7 TRIGGER 2 IN
8 Sync
9 TRIGGER 1 OUT
10 TRIGGER 2 OUT
11 Analog Out
12 Digital Bus
13 Aux IF Out
14 Line power input
15 Removable Disk Drive
16 VGA
17 DisplayPort
18 LAN/USB
X-Series Signal Analyzers Getting Started and Troubleshooting Guide
Input for an external frequency reference signal.
LVDS output for I and Q.
An output of the analyzer internal 10 MHz frequency reference signal. It is used to
lock the frequency reference of other test equipment to the analyzer.
For use with Keysight N4000A, N4001A, N4002A Smart Noise Sources (SNS).
For use with Keysight 346A, 346B, and 346C Noise Sources.
Allows external triggering of measurements.
Allows external triggering of measurements.
Reserved for future use.
A trigger output used to synchronize other test equipment with the analyzer.
Configurable from the Input/Output keys.
A trigger output used to synchronize other test equipment with the analyzer.
Configurable from the Input/Output keys.
For Option YAV:
Screen Video
For Option YAS:
Screen Video
Log Video
Linear Video
For Option EMC or N9063C Analog Demod Measurement Application:
Demod Audio
Reserved for future use
CR3 Second IF Out (PXA, MXA, and EXA)
CRP Arbitrary IF Out (PXA, MXA, and EXA)
ALV Log Video (PXA)
The AC power connection. See the product specifications for more details.
Standard on all analyzers.
Allows connection of an external VGA monitor.
Used for video output. Accepts a standard mini-display port connector, or
adapter for connection of an external monitor.
A TCP/IP Interface that is used for remote analyzer operation.
USB 2.0 port, Type A Connect to external peripherals such as a mouse, keyboard,
printer, DVD drive, or hard drive.
Description
33