Keysight Technologies UXA N9040B Getting Started And Troubleshooting Manual page 35

Front and Rear Panel Features
Rear-Panel Features
Item
# Name
5 USB Connector
6 LAN/USB
7 DisplayPort
8 VGA
9 Removable Disk Drive
10 Line power input
11 Analog Out
12 TRIGGER 1 OUT
13 Sync
14 TRIGGER 1 IN
15 Noise Source Drive +28 V
(Pulsed)
16 SNS Series Noise Source
17 10 MHz OUT
X-Series Signal Analyzers Getting Started and Troubleshooting Guide
USB 2.0 port, Type B. USB TMC (test and measurement class) connects to an
external pc controller to control the instrument and for data transfers over a 480
Mbps link.
A TCP/IP Interface that is used for remote analyzer operation.
USB 2.0 port, Type A Connect to external peripherals such as a mouse, keyboard,
printer, DVD drive, or hard drive.
Used for video output. Accepts a standard mini-display port connector, or
adapter for connection of an external monitor.
Allows connection of an external VGA monitor.
Standard on all analyzers.
The AC power connection. See the product specifications for more details.
For Option EMC or N9063C Analog Demod Measurement Application:
Demod Audio
A trigger output used to synchronize other test equipment with the analyzer.
Configurable from the Input/Output keys.
Reserved for future use.
Allows external triggering of measurements.
For use with Keysight 346A, 346B, and 346C Noise Sources.
For use with Keysight N4000A, N4001A, N4002A Smart Noise Sources (SNS).
An output of the analyzer internal 10 MHz frequency reference signal. It is used to
lock the frequency reference of other test equipment to the analyzer.
Description
35