Controlling The Instrument - Keysight Technologies UXA N9040B Getting Started And Troubleshooting Manual

Using Windows Tools
Embedded Web Server: Using the X-Series Signal Analyzers Remotely

Controlling the Instrument

Selecting this tab enables you to view, control and interact with the instrument
through the web server.
Table 4-10 Selecting the Control Instrument tab
Step
1. Select
2. You can now enter new settings
as required.
X-Series Signal Analyzers Getting Started and Troubleshooting Guide
Control Instrument
Notes
A password entry dialog appears.
By default, this password is set at the factory as
"measure4u". However, you may subsequently change the
System
password. (Select
Password Reset
on the instrument front panel to
change the password.)
When the correct password has been entered, the Control
Instrument web page appears.
I/O Config Web
, ,
75