Check The Basics - Keysight Technologies UXA N9040B Getting Started And Troubleshooting Manual

Troubleshooting

Check the Basics

Check the Basics
— Is there power at the receptacle?
— Is the analyzer turned on? Check to see if the green LED beside the power
— If other equipment, cables, and connectors are being used with your signal
— Is the Measurement Application running? If not, there is a software launch
— Does the instrument application have the focus? If not, move focus to the
— Review the measurement procedures being performed when the problem
— If the analyzer is not functioning as expected, return the analyzer to a
Some analyzer settings are not affected by a Preset. If you wish to reset the
analyzer settings, press
— Is the measurement being performed, and the results that are expected,
82
switch is on. Also, listen for internal fan noise to determine if the analyzer
cooling fans are running.
analyzer, make sure they are connected properly and operating correctly.
If the analyzer cannot completely load or run the operating system, or the
instrument application is not successfully launched, the problem could be a
corrupt disk drive. If the analyzer gets far enough along in the boot process
to run the "Instrument Recovery System", perform the
Process" as described on page 60.
shortcut/icon on the desktop.
application with Alt-Tab.
first appeared. Are all of the settings correct?
known state by pressing Mode Preset.
System
within the specifications and capabilities of the analyzer?
Refer to the specifications guide for your analyzer.
http://literature.cdn.keysight.com/litweb/pdf/N9040-90002.pdf
http://literature.cdn.keysight.com/litweb/pdf/N9030-90089.pdf
http://literature.cdn.keysight.com/litweb/pdf/N9020-90276.pdf
http://literature.cdn.keysight.com/litweb/pdf/N9010-90071.pdf
http://literature.cdn.keysight.com/litweb/pdf/N9000-90035.pdf
Technical manual pdf files are available on the documentation DVD
provided with the instrument, and on the Keysight website:
http://www.keysight.com/find/uxa_manuals
http://www.keysight.com/find/pxab_manuals
http://www.keysight.com/find/mxab_manuals
http://www.keysight.com/find/exab_manuals
X-Series Signal Analyzers Getting Started and Troubleshooting Guide
Power On Restore Power On Defaults
, ,
"Disk Drive Recovery
.