Table of Contents
Advertisement
2.
Press the modules down onto the VESA plate.
3.
Slide the quick release latch on the back of the VESA plate to the locked position to lock all modules
together.
CAUTION:
There are four tabs in the VESA plate. When you position the Elite Slice G2 configuration
correctly onto the VESA plate and slide the quick release latch to the locked position, the four tabs lock
the VESA plate to the Elite Slice G2 assembly. If the VESA plate is not correctly oriented, the quick release
latch cannot be moved to the locked position and the modules are not secured.
4.
Install a security cable in the VESA plate security cable slot to prevent the quick release latch from being
unlocked and the modules from being separated.
NOTE:
The security cable is designed to act as a deterrent, but it may not prevent the computer from
being mishandled or stolen.
Connecting or removing modules
7
Advertisement
Table of Contents
