Download  Print this page

HP Elite Slice G2 Maintenance And Service Manual Page 109

Skype room system.
Hide thumbs

Advertisement

Nonvolatile
Memory Type
Amount (Size)
Intel Management
1.5 MBytes or 7
Engine Firmware
MBytes
(present only in
select Elite or Z
models. For more
information, go to
http://www.hp.com/
support. Select
Find your
product, and then
follow the on-
screen
instructions.)
Bluetooth flash
2 Mbit
(select products
only)
802.11 WLAN
4 Kbit to 8 Kbit
EEPROM
Webcam (select
64 Kbit
products only)
Fingerprint reader
512 KByte flash
(select products
only)
Does this
Does this
memory
memory
store
retain data
customer
when power
data?
is removed?
Yes
Yes
No
Yes
No
Yes
No
Yes
Yes
Yes
What is the
purpose of this
How is data input into this
memory?
memory?
Stores
Management Engine Code is
Management
programmed at the factory.
Engine Code,
Code is updated via Intel
Settings,
secure firmware update
Provisioning
utility. Unique Provisioning
Data and iAMT
Data can be entered at the
third-party data
factory or by an
store.
administrator using the
Management Engine (MEBx)
setup utility. The third party
data store contents can be
populated by a remote
management console or local
applications that have been
registered by an
administrator to have access
to the space.
Stores
Bluetooth flash is
Bluetooth
programmed at the factory.
configuration
Tools for writing data to this
and firmware.
memory are not publicly
available but can be obtained
from the silicon vendor.
Stores
802.11 WLAN EEPROM is
configuration
programmed at the factory.
and calibration
Tools for writing data to this
data.
memory are not made public.
Stores webcam
Webcam memory is
configuration
programmed using a utility
and firmware.
from the device
manufacturer that can be run
from Windows.
Stores
Fingerprint reader memory is
fingerprint
programmed by user
templates.
enrollment in HP
ProtectTools Security
Manager.
How is this memory
write-protected?
product, and then follow
the on-screen
instructions.
The Intel chipset is
configured to enforce
hardware protection to
block all direct read/write
access to this area. An
Intel utility is required for
updating the firmware.
Only firmware updates
digitally signed by Intel
can be applied using this
utility.
A utility is required for
writing data to this
memory and is made
available through newer
versions of the driver
whenever the flash
requires an upgrade.
A utility is required for
writing data to this
memory and is typically
not made available to the
public unless a firmware
upgrade is necessary to
address a unique issue.
A utility is required for
writing data to this
memory and is typically
not made available to the
public unless a firmware
upgrade is necessary to
address a unique issue.
Only a digitally signed
application can make the
call to write to the flash.
Nonvolatile memory usage 101

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: