M.2 PCIe solid state drive (SSD)
The computer offers both 2.5-inch and M.2 solid-state drives, which are installed in different locations.
An M.2 solid-state drive socket is available on the system board under the fan sink. For more information
about removing a 2.5-inch solid-state drive, see
Description
256 GB, PCIe, NVMe, TLC
256 GB, PCIe, NVMe, value
To remove the solid-state drive:
1.
Remove the access panel
2.
Remove the Base Module
3.
Remove the fan sink
4.
Locate the solid state drive on the system board.
5.
Remove the screw securing the solid state drive to the system board.
38
Chapter 4 Removal and replacement procedures – HP Elite Slice Base Module
2.5-inch, solid-state drive (SSD) on page
(Access panel on page
(Base Module on page
(Fan sink on page
37).
21).
30).
26.